Comprehensive Guide to the New Calgon Complete Care Mini Split Cleaning Kit
Introduction
Hello, HVAC enthusiasts and maintenance experts. Jim Dufault here for New Calgon with another crucial micro-training session. Today, we are delving into the New Calgon Complete Care Mini Split Cleaning Kit, a powerful solution designed to simplify the cleaning process of mini-split systems. My aim is to guide you through the contents of this kit, demonstrate its applications, and illustrate the step-by-step process of effectively using these tools to maintain a mini split unit.
Why Cleaning Your Mini Split is Crucial
Regular maintenance of your mini split is vital for its longevity and efficiency. Over time, dust, dirt, and other contaminants accumulate on the coils and within the system. Without proper cleaning, the unit’s performance could suffer, leading to higher energy bills, reduced cooling or heating efficiency, and potentially costly repairs. So, let’s explore how the New Calgon Complete Care Mini Split Cleaning Kit can play an essential role in ensuring your unit remains in top-notch condition.
What’s Inside the Bucket?
Before we dive into the cleaning process, let’s take a closer look at what comes inside the Complete Care Mini Split Cleaning Kit.
-
Two Cans of TriPower HD Coil Cleaner: This is a multi-functional cleaner with exceptional detergent, degreasing, and deodorizing properties. It is gentle on micro-channel coils, making it suitable for condenser coils, evaporator coils, and, of course, mini-split coils.
-
Heavy-Duty Maintenance Bag: New Calgon’s Clean Guard Mini Split Maintenance Bag is specifically designed to drape around the head of the mini split unit. This bag features an eight-foot drain line, ensuring that any water or cleaning solution flows directly into the bucket below without mess.
- Four Gel Tab Minis: These are engineered to be placed in the condensate drain line. Each tab helps maintain a clear drain line for up to three months, preventing clogs and ensuring efficient drainage. One kit provides sufficient supplies for cleaning up to four mini split units.
Armed with this comprehensive set, let’s proceed to a real-world application scenario where we’ll clean a mini split unit from start to finish.
Preparing for the Cleaning Process
Preparation is key to an efficient cleaning process. Here are the preliminary steps:
-
Safety First: Ensure that the power to the mini split unit is turned off. Safety cannot be overemphasized when dealing with electrical appliances and cleaning agents.
- Remove the Covers: Take off the cover of the mini split unit and the small louver situated at the bottom. These actions expose the inner components that require cleaning.
Applying the Maintenance Bag
The Clean Guard Mini Split Maintenance Bag is designed to minimize mess and direct waste liquids appropriately. Here’s how to set it up:
-
Positioning the Bag: Drap the bag over the top of the mini split unit. There is a black cord attached to the bag—follow this cord around the edges of the mini split head.
- Securing the Bag: Once the bag is adequately draped, secure it using the drawstring at the bottom. Confirm that the eight-foot drain line extends nicely down to the bucket. While our demonstration involves placing the bucket on a table for easier viewing, typically, you’d place it on the floor.
Cleaning the Coils with TriPower HD
Next, it’s time to tackle the coils with New Calgon’s TriPower HD Coil Cleaner.
-
Shaking the Can: Ensure the can of coil cleaner is vigorously shaken to mix its contents well.
-
Personal Protective Equipment: Put on gloves and eye protection. This is important to prevent any accidental splashes of the cleaning solution.
-
Applying the Cleaner: Start spraying from the top of the coil and work your way down. Be cautious, avoiding any electronics and wires, generally located on the right side of the unit.
- Let it Work: The TriPower HD cleaner will foam up, which is a good sign that it’s working. Leave the cleaner on the coils for about five to eight minutes. The foam lifts the dirt and grime, which the coil naturally pushes out through its high-pressure aerosol action.
Utilizing Natural Condensation and Rinsing
The next step involves utilizing the natural condensation process of the mini split to rinse off the cleaner:
-
Re-energizing the Unit: Turn the power back on. The cleaning kit is designed as a no-rinse formula, meaning the natural condensation produced by the running unit will rinse off the applied cleaner.
- Running the Unit: Close the maintenance bag and let the unit run. The cleaner will drip into the drain pan and proceed through the drain line, cleaning these pathways as well.
Cleaning the Blower Wheel
While waiting for the cleaner to do its magic on the coils, it’s an excellent opportunity to tackle the blower wheel.
-
Turbo Tank Setup: I recommend using the Turbo Tank, which holds 4.5 gallons of water and is battery-powered. It comes with a nine-inch wand and two spray nozzles, making it ideal for reaching the blower wheel’s inner areas.
- Spraying the Blower Wheel: Use the wand to spray inside the blower wheel housing. This thorough rinse helps remove any built-up dirt or debris, enhancing the overall efficiency of the unit.
Final Touches with Gel Tab Minis
The final step in the cleaning routine involves placing the Gel Tab Minis into the condensate drain pan:
- Placing the Tabs: Simply pop one gel tab into the drain pan. This aids in maintaining a clean drain line for up to three months, preventing potential clogs that can disrupt your system’s drainage.
By following these meticulous steps, you ensure your mini split unit remains efficient, clean, and in optimal operating condition.
Conclusion
Cleaning and maintaining your mini split system doesn’t have to be daunting. With the New Calgon Complete Care Mini Split Cleaning Kit, you have access to professional-grade tools and solutions that simplify the process. Whether you’re an HVAC professional or a diligent homeowner, this kit empowers you to maintain your mini split systems effectively and efficiently.
For additional information or any questions, feel free to reach out to your New Calgon territory manager or contact New Calgon directly at info@newcalgon.com.
Maintaining the efficiency and longevity of your mini split system is within your grasp with the right tools and knowledge. Thanks for joining me, Jim Dufault, in this detailed walkthrough. Until next time, happy cleaning!
Note: Always adhere to your local regulations and safety standards when performing maintenance on HVAC systems.