Author: Mike Izzo

Hi, I'm Mike Izzo, the author behind HVAC Direct Plus. As the tagline suggests, my goal is to empower you with the knowledge and insights needed to make the best choices in heating, ventilation, and air conditioning. Whether you're looking for energy-efficient solutions or innovative gadgets, I provide comprehensive reviews and expert opinions on the latest HVAC products, air purifiers, thermostats, and service truck accessories. Stay updated with industry trends and explore our extensive collection of reviews to ensure your home or business is equipped with the perfect products for enhanced comfort and air quality. Join me on this journey to a cleaner and cozier living space.

  • Klein K11095 Wire Stripper: My Go-To Tool for 20 Years

    ByMike Izzo

    I’ve been carrying the Klein K11095 in my tool bag since 2004, and I’m still using the same pair. That should tell you something right there. This isn’t some fancy tool that impresses the apprentices-it’s the one I reach for on every single job because it just works. The wire stripping is clean, the cuts are precise, and after two decades of daily use in attics, crawl spaces, and behind air handlers, it still feels solid in my hand. I’ve watched cheaper strippers fall apart in months, but this Klein keeps delivering. Made in the USA means something when you’re counting on a tool to perform in the field. If you’re serious about HVAC work, this is the wire stripper you buy once and never think about again.

  • Klein Tools 935AB4V: My Go-To Torpedo Level

    ByMike Izzo

    After running through countless torpedo levels over the years, I’ve finally found one that doesn’t quit on me. The Klein 935AB4V has become a permanent fixture in my tool bag, and for good reason. That high-vis orange isn’t just for show—when you’re working in dim mechanical rooms or crawl spaces, you can actually spot this thing without playing hide-and-seek with your gear. The magnetic track grabs onto ductwork and conduit like it means business, freeing up both hands when you need them most. What really sold me are those four vial options (0/30/45/90 degrees). Whether I’m checking drain lines or setting up complex duct runs, I’ve got the angle I need without switching tools. The V-groove is clutch for pipe work too. It’s built tough enough to handle real jobsite abuse, and at six inches, it fits perfectly where larger levels won’t.

  • I Tested Klein’s Laser Measure in Real HVAC Work

    ByMike Izzo

    I’ve been crawling through attics and measuring ductwork for over a decade, and I’m done with tape measures that kink up in tight spaces. When Klein Tools sent me their laser distance measure to test, I was skeptical—I’ve seen plenty of gadgets that work great in a warehouse but fail in a sweltering mechanical room. After three weeks of real jobs, from residential service calls to commercial retrofits, this thing’s earned a permanent spot in my bag. It switches between feet, inches, and meters instantly, which saves me from doing math when I’m already sweating through my shirt. The laser holds steady even when I’m balancing on a ladder, and the measurements are dead-on accurate. Is it perfect? No tool is. But it’s made my job measurably easier.

  • Klein 32293 Insulated Screwdriver: My Go-To Tool

    ByMike Izzo

    I’ve been carrying the Klein 32293 in my tool bag for two years now, and it’s become the screwdriver I reach for first on almost every service call. The flip blade design means I’m not juggling two separate tools when I’m cramped inside a furnace cabinet or working overhead on a condensing unit. What really matters in this trade is the insulation rating – it’s tested to 1000V, which gives me peace of mind when I’m working around electrical components. The #2 Phillips and 1/4-inch slotted tips fit terminal screws perfectly, no stripping or slipping. The grip stays comfortable even when my hands are sweaty or greasy. It’s not the cheapest option out there, but Klein builds tools that last. I haven’t had to replace mine yet, and it still feels as solid as day one.

  • Klein MM420 Review: My Go-To HVAC Multimeter

    ByMike Izzo

    After five years in HVAC, I’ve burned through my share of cheap multimeters. The Klein MM420 changed that. This thing handles everything I throw at it—from checking 24V control circuits to testing compressor windings in hundred-degree attics. The auto-ranging feature saves time when I’m bouncing between voltage checks and resistance readings, and the TRMS actually matters when you’re diagnosing variable-speed equipment. What really sold me was durability. I’ve dropped it off a condenser unit, left it in the rain, and it keeps working. The leads are thick enough to survive daily abuse, and the display stays readable even in direct sunlight. At this price point, you won’t find a tougher, more reliable meter for HVAC work. It’s been in my bag every single day for two years.

  • Klein Hard Hat Chin Strap: Worth the Upgrade?

    ByMike Izzo

    I’ve been wearing hard hats on job sites for over a decade, and I’ll be straight with you—most chin straps are garbage. They either dig into your skin, slip off when you’re crawling through attics, or snap after a few months of real use. So when Klein came out with their KHHSTRP chin strap, I was skeptical.

    After three months of daily wear in Florida heat and cramped mechanical rooms, I’m impressed. The soft chin cup actually lives up to its name—no more raw skin after a 10-hour day. The multi-point adjustment isn’t just marketing fluff; it actually stays where you set it. Is it worth upgrading from whatever came with your hard hat? If you’re spending serious time in crawl spaces or working overhead, absolutely. If you only wear your hat occasionally, probably not.

  • Klein 11046 Wire Stripper: My Field-Tested Review

    ByMike Izzo

    I’ve stripped more wires in crawlspaces and attics than I care to count, and the Klein 11046 has earned a permanent spot in my tool bag. This isn’t some fancy gadget that impresses the apprentices—it’s a straightforward stripper that does exactly what you need when you’re running thermostat wire or low-voltage controls.

    The precision-ground holes consistently strip 16-26 AWG stranded without nicking the copper, which matters when you’re dealing with delicate control circuits. At under six inches, it fits where those bulkier strippers won’t, especially in tight junction boxes. Yes, it’s Made in USA, and you can feel it in the build quality.

    After six months of daily use, the cutting edges are still sharp and the spring tension hasn’t weakened. It’s not revolutionary, but it’s reliable—and in this trade, that’s what counts.

  • Klein Tools 32306INS: My Go-To Insulated Driver

    ByMike Izzo

    I’ve been carrying the Klein 32306INS for eight months now, and it’s earned its spot in my daily rotation. The 1000V rating isn’t just marketing—when you’re working near live circuits in tight mechanical rooms, that peace of mind matters. What really sold me was the auto-locking collar. No more bits backing out mid-turn when you’re shoulder-deep in a furnace cabinet. The in-handle storage actually works, unlike some drivers where the bits rattle loose or jam up. I keep my most-used tips right there: #2 Phillips, 1/4″ and 5/16″ nut drivers see constant action on contactors and terminal blocks. The grip feels solid even with sweaty hands, and after months of panel work and countless drops onto concrete, it’s holding up. It’s not the cheapest driver out there, but for insulated work, I’m not gambling with my safety.

  • Klein 69381 Test Leads: A Pro’s Honest Take

    ByMike Izzo

    I’ve been running HVAC service calls for over a decade, and I’ve burned through more test leads than I care to admit. When Klein released the 69381s, I was skeptical—another “heavy-duty” claim from a manufacturer. But after six months of daily use, these leads have earned their spot in my tool bag. The alligator clips actually grip like they mean it, even on corroded terminals, and the 3-foot length hits that sweet spot where you’ve got reach without tangled mess. What really sold me? They’ve survived being slammed in van doors, dragged across rooftops, and forgotten in 120-degree attics. The banana plugs are still solid, no wiggle. Are they perfect? No. But they’re the first leads I’ve used that don’t feel like disposable junk. For the price point, they’re legitimate.

  • I Tested Klein’s 935CSEL: My Honest Take on This Square

    ByMike Izzo

    I’ve been swinging wrenches and running duct for over a decade, and I’ve gone through more squares than I care to admit. When Klein’s 935CSEL landed in my tool bag three months ago, I was skeptical—another “game-changer,” right? But here’s the thing: this square actually earned its spot next to my Knipex and Channellocks. The magnetic edge? Total game-changer when you’re solo on a ladder. That bubble level isn’t just for show either—it’s saved my bacon more than once on condenser pad installs. The stainless steel hasn’t rusted despite living in my wet van, and the double-sided markings are still crisp after constant abuse. Is it perfect? No. But it’s honest work for honest money, and that’s all I ask from my tools.

  • Klein’s Ferrule Crimper: A Pro’s Take on Quality

    ByMike Izzo

    I’ve been running HVAC service calls for over a decade, and I can spot tool hype from a mile away. When Klein released their 34055 ferrule crimper, I’ll admit I was skeptical—another “must-have” tool gathering dust in my van? But after six months of daily use on control wiring and thermostat installations, this thing’s earned its spot in my everyday bag. The ratchet mechanism isn’t just smooth; it’s actually adjustable, which matters when you’re crimping everything from 22 AWG thermostat wire to heavier 10 AWG runs. What sold me is the consistency—every crimp comes out clean and secure, no re-dos. It’s not cheap, but neither are callbacks for loose connections. If you’re serious about professional-grade terminations, this crimper delivers.

  • Klein Klaw Pliers: My Go-To Set for HVAC Work

    ByMike Izzo

    I’ve been running Klein’s Klaw pump pliers set in my van for two years now, and these tools have earned their spot in my daily rotation. The V-jaw design grips hex nuts and round pipe fittings better than traditional pliers—no more slipping on condensate drain connections or gas line fittings. The hardened teeth actually hold up to regular abuse, which matters when you’re cranking on stuck flare nuts in 100-degree attics.

    What sold me is the compact head design. I can get these into tight spots behind air handlers where my old channel locks wouldn’t fit. The 7-inch handles refrigerant service valves perfectly, while the 12-inch tackles larger diameter work. Sure, they cost more than box-store pliers, but I’m not replacing them every six months. For daily HVAC work, they’re worth it.